Changes between Version 9 and Version 10 of HowToUseCORNET

Timestamp:

04/22/10 11:29:05 (14 years ago)

Author:

trnewman

Comment:

--

HowToUseCORNET

@@ -1 +1 @@
 == Current Testbed Operational Status ==
 
-The current testbed consists of 5 servers each with Ubuntu 9.04 linux operating system.  Several of the nodes have a USRP1 attached.  Within each USRP1 is a single RFX400 daughterboard that is able to transmit and receive from approximately 400 MHz - 500 MHz.  
+
+=== '''NOTE:'''  We are in the process of moving the preliminary testbed over to the actual 48 node testbed system.  For this reason, you may encounter a varying degree of connection problems with the preliminary nodes.  This is also the reason there are currently only 3 available, as the others have been migrated over.  The full testbed will be available within the next 2 months. ===
+
+
+
+The current testbed consists of 3 servers each with Ubuntu 9.04 linux operating system.  Several of the nodes have a USRP1 attached.  Within each USRP1 is a single RFX400 daughterboard that is able to transmit and receive from approximately 400 MHz - 500 MHz.  
 
 If another daughterboard is required for your project, please contact Dr. Timothy Newman (trnewman@vt.edu).
@@ -10 +15 @@
 The port list is as follows:
 
- * '''Node1-1''': 6001 (USRP1-RFX400)
+ * (OFFLINE) '''Node1-1''': 6001 (USRP1-RFX400)
  * '''Node1-2''': 6002 (USRP1-RFX400)
- * '''Node1-3''': 6003 
- * '''Node1-4''': 6004 (USRP1-RFX400)
- * '''Node1-5''': 6005
+ * '''Node1-3''': 6003 (USRP1-RFX400)
 
 For example, to access node1-3, ssh to the IP address ''128.173.221.42'' using port 6003.